Standard version
Load capacity: maximum 2500 kg (2-falls, FEM 1 Am, ISO M4)
Standard voltages:
3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz
1 × 115 V / 50 Hz, 1 × 230 V / 50 Hz
42 V low voltage control
1 phase motor: 1 speed
3 phase motor: 1 or 2 speeds
Protection class IP65
Eyebolt suspension
Standard lifting height 3 m
Minimum 8-fold chain safety factor (1 fall, FEM 2m, ISO M5)
Control cable length 1.8 m
Ergonomic control switch with emergency-stop
Control switch with external strain relief
Geared limit switches for highest and lowest hook position (3 ph.)
Isolation class F (motor)
DC spring-loaded brake
Slipping clutch adjustable and not in the flow of forces

Performance data GPM250, GP250/500/1000

The GP is simple in its structure and does not contain any sensitive electronics, which minimizes the risk of operational  interruptions. It is characterised by quiet running and is made for longevity whilst working hard. The ergonomic control switch with 42 V low voltage allows convenient and safe working. Maintenance is easy, quick and needs no special tools.

Profile steel chain
The higher cross-sectional area reduces wear and increases the lifetime of the chain. The GP has a chain safety factor of at least 8-times (FEM, 2m, ISO, M5). The case hardened and manganese phosphated profile steel chain provides about 15% more capacity at an identical nominal diameter compared to the round steel chain.

Polygonal connections
The inner part of the modularly designed chain hoist embodies real innovation. All shaft-hub connections are built to a polygonal design. This allows significantly faster disassembly and assembly during maintenance and thus reduces service costs.

Protection class IP65
A feature of the hoist and the control switch is the protection class IP65. It is dust proof and protected against water jets. As it is compact and robust designed, the GP is best suited for dusty environments as well as for outdoor operation.

Control switch
The control switch fits comfortably in your hand and is ergonomically designed. It is robust, impact-resistant, safe to operate and controlled by 42 V low voltage. Push buttons placed in parallel increase the ease of operation. The external strain relief protects the control cable.

Direct control, special control
Radio remote control
Frequency inverter
Other operating voltages on request
Other control voltages on request
Other speeds available on request
Single handed operation with controls on the handle
Hook suspension
Safety load locking hook
Geared limit switch with two additional emergency stops
External limit switch / multiple limit switches
Parallel connection of multiple chain hoists
Operating data counter
Press-on and press-off control switch
Temperature monitoring to prevent the motor from overheating
Manual brake release / Second brake
Chain container for various lifting heights
Gear grease for low temperature use / food industry
Tropicalised insulation
Slack chain shutdown