Electric chain hoists
Electric chain motors D8
The D8 motor corresponds to a standard industrial electric chain hoist in accordance with EN 14492, DIN 56950 with the difference that the D8 motor is usually used without a handheld controller and in mobile event technology climbing on its chain. As an additional securing measure, the installation of a secondary safety component is required to fix the load. GIS motors in D8 execution are applicable as climbing or stationary hoists without modification up to 3200 kg lifting capacity in single fall operation or 6300 kg in double fall operation. A second, independent brake can be assembled to the hoist in a few simple steps.
Electric chain motors D8+
The GIS motor in D8 Plus version is an electric chain hoist which is specifically developped, rated and designed for holding loads above people. It is light and compact in design and thus perfectly suited for mobile use. All components which are in the flow of forces are statically dimensioned for the double of the nominal rated capacity. D8 Plus motors are suitable for climbing and stationary hoists without any modifications. The maximum lifting capacity in single fall execution is 2500 kg at a chain safety factor of minimum 8:1 in accordance with IGVW SQP2.
Electric chain motors C1
The GIS motor in C1 version is an electric chain hoist which is specifically developped, rated and designed for holding and moving loads above people. It is light and compact in design and thus perfectly suited for mobile use and responds to the requirements in accordance with EN 14492, DIN 56950 and IGVW SQP2. Due to the modular design of the GIS chain hoist, the path and load measurement can be implemented in a simple way. Encoders for path measurement can be mounted on the chain wheel or on the rotor shaft. Due to the high power reserve of the motors, the chain hoists have an excellent synchronisation during group movements. GIS motors in C1 version also cover high lifting speeds up to 32 m/min. (50 Hz).